中文核心期刊

中国科技核心期刊

机械工程领域高质量科技期刊(T3)

科技期刊世界影响力指数期刊(WJCI)

RCCSE中国核心学术期刊

INSPEC、AJ、JST数据库收录期刊

2025年第11期目次

设计与研究

面向等距刀路的三角网格曲面自适应区域划分

谢威阵,王波兴.面向等距刀路的三角网格曲面自适应区域划分[J].组合机床与自动化加工技术,2025(11):1-6,11.

XIE Weizhen, WANG Boxing. Adaptive region segmentation of triangular mesh surfaces for iso-interval tool path[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):1-6,11.

考虑多场因素影响的电主轴临界转速分析

贾鹏程,耿遵敏,陈红昌,等.考虑多场因素影响的电主轴临界转速分析[J].组合机床与自动化加工技术,2025(11):7-11.

JIA Pengcheng, GENG Zunmin, CHEN Hongchang, et al. Analysis of the critical speed of motorized spindle considering the effect of multiphysics factors[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):7-11.

几何误差对螺旋锥齿轮齿面精度的敏感性分析

苟正龙,汪中厚,李俊,等.几何误差对螺旋锥齿轮齿面精度的敏感性分析[J].组合机床与自动化加工技术,2025(11):12-17.

GOU Zhenglong, WANG Zhonghou, LI Jun, et al. Sensitivity analysis of geometric errors on the tooth surface accuracy of spiral bevel gears[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):12-17.

基于改进鲸鱼优化算法的工业机器人轨迹规划

郭北涛,潘相润,张丽秀.基于改进鲸鱼优化算法的工业机器人轨迹规划[J].组合机床与自动化加工技术,2025(11):18-22.

GUO Beitao, PAN Xiangrun, ZHANG Lixiu. Industrial robot trajectory planning based on improved whale optimization algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):18-22.

基于NRBO-VMD的谐波减速器故障特征提取

田康康,李志海,于洪鹏,等.基于NRBO-VMD的谐波减速器故障特征提取[J].组合机床与自动化加工技术,2025(11):23-30,37.

TIAN Kangkang, LI Zhihai, YU Hongpeng, et al. Fault feature extraction for harmonic reducers based on NRBO-VMD[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):23-30,37.

改进粒子群算法的六轴搬运机器人时间最优轨迹规划

叶彬世,刘建群.改进粒子群算法的六轴搬运机器人时间最优轨迹规划[J].组合机床与自动化加工技术,2025(11):31-37.

YE Binshi, LIU Jianqun. Time-optimal trajectory planning of six-axis handling robots using improved particle swarm optimization algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):31-37.

基于改进RRT的协作机器人避障路径规划研究

刘哲,何俊杰,王天琪,等.基于改进RRT的协作机器人避障路径规划研究[J].组合机床与自动化加工技术,2025(11):38-42,48.

LIU Zhe, HE Junjie, WANG Tianqi, et al. Study on obstacle avoidance path planning for collaborative robot based on improved RRT[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):38-42,48.

改进点线特征融合的视觉惯性SLAM算法研究

刘明,王枭.改进点线特征融合的视觉惯性SLAM算法研究[J].组合机床与自动化加工技术,2025(11):43-48.

LIU Ming, WANG Xiao. Research on visual-inertial SLAM algorithm for improving point line feature fusion[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):43-48.

动/静平台非一致型并联机构动力学建模与性能评价

张玉凤,杨崇温,李海虹,等.动/静平台非一致型并联机构动力学建模与性能评价[J].组合机床与自动化加工技术,2025(11):49-56,62.

ZHANG Yufeng, YANG Chongwen, LI Haihong, et al. Dynamic modeling and performance evaluation of non-uniform parallel mechanism with dynamic/static platform[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):49-56,62.

基于差分的五轴混联机构时间最优并行速度规划

王华明,高健,罗于恒,等.基于差分的五轴混联机构时间最优并行速度规划[J].组合机床与自动化加工技术,2025(11):57-62.

WANG Huaming, GAO Jian, LUO Yuheng, et al. Time optimal parallel velocity planning for five axis hybrid mechanisms based on difference[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):57-62.

近净成形叶片加工轨迹规划研究

武洵德,丁悦,付余.近净成形叶片加工轨迹规划研究[J].组合机床与自动化加工技术,2025(11):63-68,74.

WU Xunde, DING Yue, FU Yu. Research on machining trajectory planning of near net forming blade[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):63-68,74.

参数变化下磁悬浮双转子系统全周碰摩振动分析

孔腾飞,王念先,刘明政.参数变化下磁悬浮双转子系统全周碰摩振动分析[J].组合机床与自动化加工技术,2025(11):69-74.

KONG Tengfei, WANG Nianxian, LIU Mingzheng. Analysis of all-round rubbing vibration in a magnetically suspended dual-rotor system under parameter variations[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):69-74.

基于改进RRT法的H型钢立板机器人焊接路径优化

吝健全,徐金亭,郭强,等.基于改进RRT法的H型钢立板机器人焊接路径优化[J].组合机床与自动化加工技术,2025(11):75-79,85.

LIN Jianquan, XU Jinting, GUO Qiang, et al. Path optimization for robot welding of H-beam uprights based on improved RRT algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):75-79,85.

面向复杂曲面粗糙度测量的无干涉路径规划方法

庄世宁,晏政,袁园,等.面向复杂曲面粗糙度测量的无干涉路径规划方法[J].组合机床与自动化加工技术,2025(11):80-85.

ZHUANG Shining, YAN Zheng, YUAN Yuan, et al. Non interference path planning method for measuring roughness of complex surfaces[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):80-85.

面向轮廓仪误差补偿的北极海鹦-拟牛顿法研究

施天宇,赵凤霞,饶柯,等.面向轮廓仪误差补偿的北极海鹦-拟牛顿法研究[J].组合机床与自动化加工技术,2025(11):86-89,94.

SHI Tianyu, ZHAO Fengxia, RAO Ke, et al. Research on arctic puffin optimization-quasi-Newton method for error compensation of profiler[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):86-89,94.

控制与检测

改进双SOGI伪随机高频注入的PMSM无位置控制

裴煌宇,王立标,刘旭,等.改进双SOGI伪随机高频注入的PMSM无位置控制[J].组合机床与自动化加工技术,2025(11):90-94.

PEI Huangyu, WANG Libiao, LIU Xu, et al. Improved dual SOGI pseudorandom high-frequency injection for position-sensorless control of PMSM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):90-94.

改进方波注入结合SMO的IPMSM无传感器控制

陈甦欣,王于卓,王淑旺,等.改进方波注入结合SMO的IPMSM无传感器控制[J].组合机床与自动化加工技术,2025(11):95-100,108.

CHEN Suxin, WANG Yuzhuo, WANG Shuwang, et al. Sensorless control of IPMSM based on enhanced square wave injection combined with sliding mode observer[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):95-100,108.

改进BAS优化滚珠丝杠超螺旋自抗扰控制研究

陈峙,谢金祥,陈东良,等.改进BAS优化滚珠丝杠超螺旋自抗扰控制研究[J].组合机床与自动化加工技术,2025(11):101-108.

CHEN Zhi, XIE Jinxiang, CHEN Dongliang, et al. Research on the control of ball screw super-twisting active disturbance rejection control by improved beetle antennae search algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):101-108.

基于HAFA-YOLOH的产品表面缺陷检测方法研究

杨智颖,周诗洋,严旭果,等.基于HAFA-YOLOH的产品表面缺陷检测方法研究[J].组合机床与自动化加工技术,2025(11):109-115,120.

YANG Zhiying, ZHOU Shiyang, YAN Xuguo, et al. Research on product surface defect detection method based on HAFA-YOLOH[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):109-115,120.

虚拟Y轴专用数控机床的控制系统开发

洪冠鹏,刘建群.虚拟Y轴专用数控机床的控制系统开发[J].组合机床与自动化加工技术,2025(11):116-120.

HONG Guanpeng, LIU Jianqun. Development of control system for special CNC machine tool with virtual Y-axis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):116-120.

句鹏晖,赵芳,柏爽,等.工作台静态加工精度一致性综合评价方法研究[J].组合机床与自动化加工技术,2025(11):128-132.

JU Penghui, ZHAO Fang, BAI Shuang, et al. Study on comprehensive evaluation method for consistency of static machining accuracy of workbench[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):128-132.

基于改进NSGA-Ⅲ算法的多目标柔性工艺规划方法

张宇,周学良,张映锋,等.基于改进NSGA-Ⅲ算法的多目标柔性工艺规划方法[J].组合机床与自动化加工技术,2025(11):133-139,143.

ZHANG Yu, ZHOU Xueliang, ZHANG Yingfeng, et al. A multi-objective flexible process planning method based on improved NSGA-Ⅲ algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):133-139,143.

基于自适应拓扑分析的铝合金压铸件点云去噪方法

杜宇,宋昱,郭策,等.基于自适应拓扑分析的铝合金压铸件点云去噪方法[J].组合机床与自动化加工技术,2025(11):140-143.

DU Yu, SONG Yu, GUO Ce, et al. A point cloud denoising method for aluminum alloy die castings based on adaptive topological analysis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):140-143.

考虑模态参数的机器人铣削颤振稳定性研究

荆登峰,周利东.考虑模态参数的机器人铣削颤振稳定性研究[J].组合机床与自动化加工技术,2025(11):144-151.

JING Dengfeng, ZHOU Lidong. Research on the vibration stability of robot milling considering modal parameters[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):144-151.

数控机床主轴热误差CAWOA-LSTM预测建模

刘思怡,郭忠峰,孙泓辰,等.数控机床主轴热误差CAWOA-LSTM预测建模[J].组合机床与自动化加工技术,2025(11):152-157,163.

LIU Siyi, GUO Zhongfeng, SUN Hongchen, et al. Thermal error prediction modeling for CNC machine tool spindles using CAWOA-LSTM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):152-157,163.

基于ITCN的并行多尺度特征融合刀具磨损预测

周裕存,李先旺,兰梦州,等.基于ITCN的并行多尺度特征融合刀具磨损预测[J].组合机床与自动化加工技术,2025(11):158-163.

ZHOU Yucun, LI Xianwang, LAN Mengzhou, et al. Parallel multiscale feature fusion tool wear prediction based on ITCN[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):158-163.

流-热-固耦合的高速电主轴温升预测与试验验证

张丽秀,王玉琦,李颂华,等.流-热-固耦合的高速电主轴温升预测与试验验证[J].组合机床与自动化加工技术,2025(11):164-168,176.

ZHANG Lixiu, WANG Yuqi, LI Songhua, et al. Prediction and experimental verification of high-speed electric spindle temperature rise based on fluid-thermal-solid coupling[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):164-168,176.

细长不锈钢管磁力珩磨工艺的研究

刘通义,燕昭锟,李永刚,等.细长不锈钢管磁力珩磨工艺的研究[J].组合机床与自动化加工技术,2025(11):169-176.

LIU Tongyi, YAN Zhaokun, LI Yonggang, et al. Research on magnetic honing technology of slender stainless steel pipe[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):169-176.

先进管理技术

基于双种群遗传算法机器人爆破螺栓装配线平衡优化

毛惠东,庹奎,胡启国,等.基于双种群遗传算法机器人爆破螺栓装配线平衡优化[J].组合机床与自动化加工技术,2025(11):177-182,188.

MAO Huidong, TUO Kui, HU Qiguo, et al. Balance optimization of robot blasting bolt assembly line based on dual-population genetic algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):177-182,188.

求解装配线重构与调度集成问题的协作进化算法

朱校君,徐志刚,王军义.求解装配线重构与调度集成问题的协作进化算法[J].组合机床与自动化加工技术,2025(11):183-188.

ZHU Xiaojun, XU Zhigang, WANG Junyi. A collaborative evolutionary algorithm for solving the integrated assembly line reconfiguring and scheduling problem[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):183-188.

混合邻域结构-DQL算法求解柔性作业车间调度

左李楠,袁杰.混合邻域结构-DQL算法求解柔性作业车间调度[J].组合机床与自动化加工技术,2025(11):189-194,200.

ZUO Linan, YUAN Jie. The double Q-learning algorithm with mixed neighborhood structure for the flexible job shop scheduling problem[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):189-194,200.

基于端到端深度强化学习的车间调度方法

蒋潇,晁永生.基于端到端深度强化学习的车间调度方法[J].组合机床与自动化加工技术,2025(11):195-200.

JIANG Xiao, CHAO Yongsheng. Job shop scheduling method based on end-to-end deep reinforcement learning[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(11):195-200.

【推荐阅读】

以上文章版权归组合机床与自动化加工技术杂志社所有，欢迎参考引用，请于文章参考文献中著录！

电   话：0411-86645290

E-mail：zhjcqk@126.com

网   址：http://zhjcz.com.cn/