中文核心期刊
中国科技核心期刊
机械工程领域高质量科技期刊(T3)
科技期刊世界影响力指数期刊(WJCI)
RCCSE中国核心学术期刊
INSPEC、AJ、JST数据库收录期刊
2026年第1期目次
设计与研究
基于合成数据与改进CycleGAN的物体位姿估计
江镇洪,姚锡凡.基于合成数据与改进CycleGAN的物体位姿估计[J].组合机床与自动化加工技术,2026(1):1-6.
JIANG Zhenhong, YAO Xifan. Object pose estimation based on synthetic data and improved CycleGAN[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):1-6.
基于热启动强化主动学习的废旧机械零件缺陷分类方法
张泽琳,宋积超,王蕾,等.基于热启动强化主动学习的废旧机械零件缺陷分类方法[J].组合机床与自动化加工技术,2026(1):7-12,18.
ZHANG Zelin, SONG Jichao, WANG Lei, et al. A method for defect classification of waste mechanical parts based on warm-start reinforcement active learning[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):7-12,18.
融合变分自编码器的轴孔装配强化学习迁移方法
曹中龙,陈成军,孟凡华.融合变分自编码器的轴孔装配强化学习迁移方法[J].组合机床与自动化加工技术,2026(1):13-18.
CAO Zhonglong, CHEN Chengjun, MENG Fanhua. Research on peg-in-hole assembly reinforcement learning migration method integrating variational autoencoders[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):13-18.
基于SSA-VMD-ICA的减速器振动信号降噪算法研究
徐涛,朱明强.基于SSA-VMD-ICA的减速器振动信号降噪算法研究[J].组合机床与自动化加工技术,2026(1):19-24,31.
XU Tao, ZHU Mingqiang. Research on noise reduction algorithm for reducer vibration signals based on SSA-VMD-ICA[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):19-24,31.
基于响应面法的金属钨磁流变抛光液组分优化实验研究
阎秋生,张枝雄,黄展亮.基于响应面法的金属钨磁流变抛光液组分优化实验研究[J].组合机床与自动化加工技术,2026(1):25-31.
YAN Qiusheng, ZHANG Zhixiong, HUANG Zhanliang. Experimental study on composition optimization of metal tungsten magnetorheological polishing fluid based on response surface methodology[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):25-31.
面向刀具异常检测的多模态时序融合网络
盖田田,黄民,孙巍伟.面向刀具异常检测的多模态时序融合网络[J].组合机床与自动化加工技术,2026(1):32-40,46.
GAI Tiantian, HUANG Min, SUN Weiwei. Multimodal temporal fusion network for tool anomaly detection[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):32-40,46.
刘书乐,方成刚,杨浩杰.基于改进YOLOv11n的减震铝筒识别算法[J].组合机床与自动化加工技术,2026(1):41-46.
LIU Shule, FANG Chenggang, YANG Haojie. Identification algorithm for shock-absorbing aluminum cylinder based on improved YOLOv11n[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):41-46.
升降轮式永磁吸附管外攀爬机器人的运动分析与磁路设计
刘军,侯宇,熊念.升降轮式永磁吸附管外攀爬机器人的运动分析与磁路设计[J].组合机床与自动化加工技术,2026(1):47-52,58.
LIU Jun, HOU Yu, XIONG Nian. Movement analysis and magnetic circuit design of pipeline external climbing robot with lifting-wheel type permanent magnet adsorption[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):47-52,58.
基于因子图优化的大型构件弱特征点云全局配准方法
苗新芳,韩晓辉,姜代旬,等.基于因子图优化的大型构件弱特征点云全局配准方法[J].组合机床与自动化加工技术,2026(1):53-58.
MIAO Xinfang, HAN Xiaohui, JIANG DaiXun, et al. Global point cloud registration method for large weak-featured components based on factor graph optimization[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):53-58.
基于全变差的离散变量拓扑优化方法
郑立伟,黄运保,周冬庆,等.基于全变差的离散变量拓扑优化方法[J].组合机床与自动化加工技术,2026(1):59-64,70.
ZHENG Liwei, HUANG Yunbao, ZHOU Dongqing, et al. Topological optimization method of discrete variables based on total variation[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):59-64,70.
基于改进帝企鹅算法的圆度误差快速精确评定方法
宋明,郑鹏,何青泽,等.基于改进帝企鹅算法的圆度误差快速精确评定方法[J].组合机床与自动化加工技术,2026(1):65-70.
SONG Ming, ZHENG Peng, HE Qingze, et al. A rapid and precise method for evaluating roundness error based on an improved emperor penguin algorithm[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):65-70.
线轨装配参数模型及其几何精度影响因素研究
李鑫,赵宏安,王智.线轨装配参数模型及其几何精度影响因素研究[J].组合机床与自动化加工技术,2026(1):71-75,82.
LI Xin, ZHAO Hong′an, WANG Zhi. Research on assembly parameter model of linear rail and its geometric accuracy influencing factors[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):71-75,82.
控制与检测
复杂场景下多尺度工件高精度检测算法
陈治润,袁杰,加尔肯别克,等.复杂场景下多尺度工件高精度检测算法[J].组合机床与自动化加工技术,2026(1):76-82.
CHEN Zhirun, YUAN Jie, RASOL Jarhinbek, et al. High-precision detection algorithm for multiscale workpieces in complex scenarios[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):76-82.
动态优先级调整的PMSM预测转矩控制
董佳男,宗剑,石垆烨,等.动态优先级调整的PMSM预测转矩控制[J].组合机床与自动化加工技术,2026(1):83-88.
DONG Jianan, ZONG Jian, SHI Luye, et al. PMSM model predictive torque control with dynamic priority adjustment[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):83-88.
基于改进MRAS的PMSM无位置传感器控制研究
董福飒,曹晟,叶年业,等.基于改进MRAS的PMSM无位置传感器控制研究[J].组合机床与自动化加工技术,2026(1):89-95,101.
DONG Fusa, CAO Sheng, YE Nianye, et al. Research on sensorless-control of PMSM based on improved MRAS[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):89-95,101.
压电快反镜的非奇异预设性能滑模控制
覃笑阳,马海峰.压电快反镜的非奇异预设性能滑模控制[J].组合机床与自动化加工技术,2026(1):96-101.
QIN Xiaoyang, MA Haifeng. Prescribed performance nonsingular sliding-mode control for piezoelectric fast steering mirror[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):96-101.
结合扰动观测器的Stewart平台改进非奇异快速终端滑模控制
曲星宇,陈启隆,李振洋.结合扰动观测器的Stewart平台改进非奇异快速终端滑模控制[J].组合机床与自动化加工技术,2026(1):102-107.
QU Xingyu, CHEN Qilong, LI Zhenyang. Improved non-singular fast terminal sliding mode control for stewart platform with disturbance observer[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):102-107.
基于变论域模糊PID控制的超声波追频方法
曹凯杰,周俊雄,范鹏,等.基于变论域模糊PID控制的超声波追频方法[J].组合机床与自动化加工技术,2026(1):108-112,119.
CAO Kaijie, ZHOU Junxiong, FAN Peng, et al. Ultrasonic frequency chasing method based on fuzzy PID control in variable theory domain[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):108-112,119.
基于QRFS的误差修正趋近律PMSM动态抗扰滑模控制
易才华,马家庆,陈昌盛,等.基于QRFS的误差修正趋近律PMSM动态抗扰滑模控制[J].组合机床与自动化加工技术,2026(1):113-119.
YI Caihua, MA Jiaqing, CHEN Changsheng, et al. Error correction approach law based on QRFS for dynamic disturbance rejection sliding mode control of PMSM[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):113-119.
轧轮几何误差与齿轮几何精度影响规律研究
马自勇,杨伟,王梓隆,等.轧轮几何误差与齿轮几何精度影响规律研究[J].组合机床与自动化加工技术,2026(1):120-126.
MA Ziyong, YANG Wei, WANG Zilong, et al. Research on the influence of geometric error of rolling wheel and geometric accuracy of gear[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):120-126.
6061铝合金机器人铣削滚压复合加工表面完整性研究
吕显云,江小辉,何方舟,等.6061铝合金机器人铣削滚压复合加工表面完整性研究[J].组合机床与自动化加工技术,2026(1):127-132.
LYU Xianyun, JIANG Xiaohui, HE Fangzhou, et al. Surface integrity study of robotic milling and rolling composite machining of 6061 aluminum alloy[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):127-132.
数控机床健康状态无传感器自检技术研究
王兆,乔石,班仔优,等.数控机床健康状态无传感器自检技术研究[J].组合机床与自动化加工技术,2026(1):133-138.
WANG Zhao, QIAO Shi, BAN Zaiyou, et al. Research on sensorless self checking technology for the health status of CNC machine tools[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):133-138.
基于ANFIS的蠕墨铸铁高速铣削性能优化研究
董育旺,徐龙华,黄传真.基于ANFIS的蠕墨铸铁高速铣削性能优化研究[J].组合机床与自动化加工技术,2026(1):139-144.
DONG Yuwang, XU Longhua, HUANG Chuanzhen. Research on high-speed milling performance optimization of compacted graphite cast iron based on ANFIS[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):139-144.
阵列复材管侧边自动化装夹装置设计
马继雨,陈君寰,康仁科,等.阵列复材管侧边自动化装夹装置设计[J].组合机床与自动化加工技术,2026(1):145-150.
MA Jiyu, CHEN Junhuan, KANG Renke, et al. Design of automatic clamping device for the side of array composite tube[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):145-150.
李昂,马俊燕,唐源斌.基于Informer-SAO-LSTM的刀具磨损预测[J].组合机床与自动化加工技术,2026(1):151-155,161.
LI Ang, MA Junyan, TANG Yuanbin. Tool wear prediction based on Informer-SAO-LSTM[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):151-155,161.
基于改进YOLO11n的工业砂轮片缺陷检测方法
尚勋,周骅.基于改进YOLO11n的工业砂轮片缺陷检测方法[J].组合机床与自动化加工技术,2026(1):156-161.
SHANG Xun, ZHOU Hua. An industrial grinding wheel defect detection method based on improved YOLOv11n[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):156-161.
斜齿轮时变啮合刚度研究及系统振动响应分析
王云鹏,胡俊宏,李嘉文,等.斜齿轮时变啮合刚度研究及系统振动响应分析[J].组合机床与自动化加工技术,2026(1):162-167,174.
WANG Yunpeng, HU Junhong, LI Jiawen, et al. Research on time-varying meshing stiffness of helical gear and vibration response analysis of system[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):162-167,174.
成对角接触球轴承的凸出量与力热性能关系研究
朱美彦,赵宏安,阮崇禄,等.成对角接触球轴承的凸出量与力热性能关系研究[J].组合机床与自动化加工技术,2026(1):168-174.
ZHU Meiyan, ZHAO Hong′an, RUAN Chonglu, et al. Study on the relationship between the protrusion of duplex angular contact ball bearings and the mechanical and thermal properties[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):168-174.
基于PI评价指标的轴承性能退化评估方法研究
陈洋,姜宏,章翔峰,等.基于PI评价指标的轴承性能退化评估方法研究[J].组合机床与自动化加工技术,2026(1):175-179,185.
CHEN Yang, JIANG Hong, ZHANG Xiangfeng, et al. Research on evaluation method of bearing performance degradation based on PI evaluation index[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):175-179,185.
先进管理技术
基于竞争机制混合算法求解柔性作业车间问题
金秋,刘浩杰,张贇贇.基于竞争机制混合算法求解柔性作业车间问题[J].组合机床与自动化加工技术,2026(1):180-185.
JIN Qiu, LIU Haojie, ZHANG Yunyun. Solving the flexible job shop problem based on a hybrid algorithm for competitive mechanisms[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):180-185.
基于仿真的构架车间人工资源配置优化
满奕乐,舒云聪,閤泰梓,等.基于仿真的构架车间人工资源配置优化[J].组合机床与自动化加工技术,2026(1):186-192,200.
MAN Yile, SHU Yuncong, XIA Taizi, et al. Optimization of human resource allocation in bogie frame workshop based on simulation[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):186-192,200.
基于改进非支配鲸鱼算法的双资源约束混合流水车间调度
谢春林,王创剑.基于改进非支配鲸鱼算法的双资源约束混合流水车间调度[J].组合机床与自动化加工技术,2026(1):193-200.
XIE Chunlin, WANG Chuangjian. Research on dual resource constrained hybrid flow workshop scheduling based on improved non dominated whale algorithm[J].Modular Machine Tool & Automatic Manufacturing Technique, 2026(1):193-200.
【推荐阅读】
以上文章版权归组合机床与自动化加工技术杂志社所有，欢迎参考引用，请于文章参考文献中著录！
电 话：0411-86645290
E-mail：zhjcqk@126.com
网 址：http://zhjcz.com.cn/
