中文核心期刊
中国科技核心期刊
机械工程领域高质量科技期刊(T3)
科技期刊世界影响力指数期刊(WJCI)
RCCSE中国核心学术期刊
INSPEC、AJ、JST数据库收录期刊
2025年第10期目次
设计与研究
面向机器人光学抛光的螺旋路径优化方法
罗钟和,范哲,李光正,等.面向机器人光学抛光的螺旋路径优化方法[J].组合机床与自动化加工技术,2025(10):1-6,13.
LUO Zhonghe, FAN Zhe, LI Guangzheng, et al. Spiral path optimization method for robot optical polishing[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):1-6,13.
基于改进蝴蝶优化算法的机械臂轨迹规划研究
刘江涛,张慧,杨其望,等.基于改进蝴蝶优化算法的机械臂轨迹规划研究[J].组合机床与自动化加工技术,2025(10):7-13.
LIU Jiangtao, ZHANG Hui, YANG Qiwang, et al. Research on trajectory planning of robot arm based on improved butterfly optimization algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):7-13.
基于改进YOLOv8的动态场景下栅格建图研究
刘加华,袁鹏,刘子畅,等.基于改进YOLOv8的动态场景下栅格建图研究[J].组合机床与自动化加工技术,2025(10):14-20.
LIU Jiahua, YUAN Peng, LIU Zichang, et al. Research on grid mapping in dynamic scenes based on improved YOLOv8[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):14-20.
基于IAVOA-BPNN的XY工作台定位误差分析
段金池,孟新宇.基于IAVOA-BPNN的XY工作台定位误差分析[J].组合机床与自动化加工技术,2025(10):21-26,31.
DUAN Jinchi, MENG Xinyu. Positioning error analysis of XY work platform based on IAVOA-BPNN[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):21-26,31.
基于改进YOLOv8的轻量化浇冒口图像分割算法
程凯伦,李虎,王玲,等.基于改进YOLOv8的轻量化浇冒口图像分割算法[J].组合机床与自动化加工技术,2025(10):27-31.
CHENG Kailun, LI Hu, WANG Ling, et al. Lightweight casting riser image segmentation algorithm based on improved YOLOv8[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):27-31.
基于改进SVM与马氏距离的机器人状态评估方法研究
姚伟滨,吴湘柠,陈义时,等.基于改进SVM与马氏距离的机器人状态评估方法研究[J].组合机床与自动化加工技术,2025(10):32-38,43.
YAO Weibin, WU Xiangning, CHEN Yishi, et al. Research on robot state evaluation method based on improved SVM and mahalanobis distance[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):32-38,43.
最小二乘法B样条拟合非圆齿轮节曲线及光顺性分析
周凯红,陈康平.最小二乘法B样条拟合非圆齿轮节曲线及光顺性分析[J].组合机床与自动化加工技术,2025(10):39-43.
ZHOU Kaihong, CHEN Kangping. Least squares B-spline fitting non-circular gear pitch curve and smoothness analysis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):39-43.
基于卷积神经网络的壳体类零件加工特征识别方法
段少佳,冯春花,苏金环,等.基于卷积神经网络的壳体类零件加工特征识别方法[J].组合机床与自动化加工技术,2025(10):44-51,57.
DUAN Shaojia, FENG Chunhua, SU Jinhuan, et al. Feature recognition method for shell parts processing based on convolutional neural network[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):44-51,57.
基于强化学习的路径规划算法研究
徐澳,付昱凯,彭瑞飞,等.基于强化学习的路径规划算法研究[J].组合机床与自动化加工技术,2025(10):52-57.
XU Ao, FU Yukai, PENG Ruifei, et al. Research on path planning algorithm based on reinforcement learning[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):52-57.
精密气浮静压转台气浮润滑支承静态性能研究
王亚东,卢志伟,张皓茹,等.精密气浮静压转台气浮润滑支承静态性能研究[J].组合机床与自动化加工技术,2025(10):58-62,68.
WANG Yadong, LU Zhiwei, ZHANG Haoru, et al. Research on the static performance of air floatation lubrication support for precision air floatation static pressure rotary table[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):58-62,68.
基于遗传混沌粒子群算法的喷涂机器人时间最优轨迹规划
刘夢真,郭丽峰,郑雨潇,等.基于遗传混沌粒子群算法的喷涂机器人时间最优轨迹规划[J].组合机床与自动化加工技术,2025(10):63-68.
LIU Mengzhen, GUO Lifeng, ZHENG Yuxiao, et al. Time optimal trajectory planning of spraying robot based on genetic chaotic particle swarm optimization algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):63-68.
基于极差法和灰色关联分析的40Cr零件内孔珩磨参数优化
张淑滢,梁志强,李学志,等.基于极差法和灰色关联分析的40Cr零件内孔珩磨参数优化[J].组合机床与自动化加工技术,2025(10):69-74,80.
ZHANG Shuying, LIANG Zhiqiang, LI Xuezhi, et al. Optimization of bore honing parameters for 40Cr parts based on the extreme variance method and grey correlation analysis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):69-74,80.
基于曲率相似性改进TrICP的点云配准算法
张伟,方麒,曾志龙,等.基于曲率相似性改进TrICP的点云配准算法[J].组合机床与自动化加工技术,2025(10):75-80.
ZHANG Wei, FANG Qi, ZENG Zhilong, et al. An improved TrICP point cloud registration algorithm based on curvature similarity[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):75-80.
改进双向跳点搜索的机器人路径规划研究
朱玉华,郭佳勇,王欣.改进双向跳点搜索的机器人路径规划研究[J].组合机床与自动化加工技术,2025(10):81-85,97.
ZHU Yuhua, GUO Jiayong, WANG Xin. Research on improved bidirectional jump point search for robot path planning[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):81-85,97.
基于自适应相位误差校正的大型物体三维重建
明士凯,张克明,于帝伟.基于自适应相位误差校正的大型物体三维重建[J].组合机床与自动化加工技术,2025(10):86-92,103.
MING Shikai, ZHANG Keming, YU Diwei. 3D reconstruction of large objects based on adaptive phase error correction[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):86-92,103.
控制与检测
牵引式风电叶片子部件双点扭转协同控制研究
杨林,张磊安,黄雪梅,等.牵引式风电叶片子部件双点扭转协同控制研究[J].组合机床与自动化加工技术,2025(10):93-97.
YANG Lin, ZHANG Lei′an, HUANG Xuemei, et al. Research on cooperative control of two-point torsion of traction wind turbine blade subcomponents[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):93-97.
基于衰减记忆滤波和强化学习的视觉伺服控制
罗云,张大斌,曹阳,等.基于衰减记忆滤波和强化学习的视觉伺服控制[J].组合机床与自动化加工技术,2025(10):98-103.
LUO Yun, ZHANG Dabin, CAO Yang, et al. Visual servo control based on attenuation memory filter and reinforcement learning[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):98-103.
光电稳定平台模型辅助改进级联自抗扰控制
陈旭,陆晗,张嘉宸.光电稳定平台模型辅助改进级联自抗扰控制[J].组合机床与自动化加工技术,2025(10):104-109.
CHEN Xu, LU Han, ZHANG Jiachen. Improved cascaded self disturbance rejection control with the assistance of optoelectronic stabilization platform model[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):104-109.
改进YOLOv8轻量化轴孔检测算法
周豪,黄海松.改进YOLOv8轻量化轴孔检测算法[J].组合机床与自动化加工技术,2025(10):110-115.
ZHOU Hao, HUANG Haisong. Improved YOLOv8 lightweight shaft hole detection algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):110-115.
基于降阶强跟踪EKF的PMSM无传感器控制
宋文杰,朱继元.基于降阶强跟踪EKF的PMSM无传感器控制[J].组合机床与自动化加工技术,2025(10):116-120,126.
SONG Wenjie, ZHU Jiyuan. Sensorless control of PMSM based on reduced-order strong tracking EKF[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):116-120,126.
基于改进ADRC的PMSM无位置传感器控制
任永强,余洋洋,王淑旺,等.基于改进ADRC的PMSM无位置传感器控制[J].组合机床与自动化加工技术,2025(10):121-126.
REN Yongqiang, YU Yangyang, WANG Shuwang, et al. Position sensorless control of PMSM based on improved ADRC[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):121-126.
双三相PMSM谐波电流的模糊双重准PR抑制策略
代磊,张晓宇,郭蓉,等.双三相PMSM谐波电流的模糊双重准PR抑制策略[J].组合机床与自动化加工技术,2025(10):127-132,139.
DAI Lei, ZHANG Xiaoyu, GUO Rong, et al. Fuzzy dual quasi-proportional-resonant control for harmonic current suppression in dual three-phase PMSM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):127-132,139.
VMC850Q立式加工中心主轴系统分区热误差补偿研究
于联周,张波,刘菲菲,等.VMC850Q立式加工中心主轴系统分区热误差补偿研究[J].组合机床与自动化加工技术,2025(10):133-139.
YU Lianzhou, ZHANG Bo, LIU Feifei, et al. Research on partition thermal error compensation of VMC850Q vertical machining center spindle system[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):133-139.
机器人自动喷涂系统在轨道车辆喷漆中的应用
郑云昊,冯凤,魏国丽,等.机器人自动喷涂系统在轨道车辆喷漆中的应用[J].组合机床与自动化加工技术,2025(10):140-144.
ZHENG Yunhao, FENG Feng, WEI Guoli, et al. Application of robot automatic spraying system in rail vehicles painting[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):140-144.
近净成形叶片的外形测量与精确配准研究
武洵德,丁悦,付余.近净成形叶片的外形测量与精确配准研究[J].组合机床与自动化加工技术,2025(10):145-151.
WU Xunde, DING Yue, FU Yu. Research on shape measurement and accurate registration of near net forming blades[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):145-151.
基于漏磁检测的钢制材料缺陷形貌反演
张蕊,张宏杰,杨涛.基于漏磁检测的钢制材料缺陷形貌反演[J].组合机床与自动化加工技术,2025(10):152-156,164.
ZHANG Rui, ZHANG Hongjie, YANG Tao. Morphological inversion of defects in steel materials based on magnetic flux leakage detection[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):152-156,164.
斜齿轮传动系统的擦边分岔特性分析
原博,吴鲁纪,杨林杰,等.斜齿轮传动系统的擦边分岔特性分析[J].组合机床与自动化加工技术,2025(10):157-164.
YUAN Bo, WU Luji, YANG Linjie, et al. Analysis on the characteristics of grazing bifurcation of helical gear transmission system[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):157-164.
基于流固耦合的薄膜反馈节流器节流特性的影响因素研究
丁贤贤,赵丽梅,穆仕豪,等.基于流固耦合的薄膜反馈节流器节流特性的影响因素研究[J].组合机床与自动化加工技术,2025(10):165-170,177.
DING Xianxian, ZHAO Limei, MU Shihao, et al. Research on the influencing factors of throttling characteristics of thin film feedback throttling device based on fluid structure coupling[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):165-170,177.
基于海象优化算法优化SVMD联合BiLSTM的滚动轴承状态监测
侯兴达,王靖岳,周浩,等.基于海象优化算法优化SVMD联合BiLSTM的滚动轴承状态监测[J].组合机床与自动化加工技术,2025(10):171-177.
HOU Xingda, WANG Jingyue, ZHOU Hao, et al. Rolling bearing condition monitoring based on walrus optimization algorithm optimized SVMD combined with BiLSTM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):171-177.
基于BFV-YOLOv8算法的硬质合金可转位刀片缺陷检测
刘建军,陈旭凤,温彬彬,等.基于BFV-YOLOv8算法的硬质合金可转位刀片缺陷检测[J].组合机床与自动化加工技术,2025(10):178-182,188.
LIU Jianjun, CHEN Xufeng, WEN Binbin, et al. Defect detection of carbide indexable inserts based on BFV-YOLOv8 algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):178-182,188.
先进管理技术
基于两阶段数学启发式方法优化AGV与作业调度问题
黎林涛,张子凯,胡一凡,等.基于两阶段数学启发式方法优化AGV与作业调度问题[J].组合机床与自动化加工技术,2025(10):183-188.
LI Lintao, ZHANG Zikai, HU Yifan, et al. Optimization of AGV and job scheduling problems based on a two-phase mathematical heuristics method[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):183-188.
基于遗传算法的柔性生产线平衡优化技术研究
卫锦,闫献国,陈峙,等.基于遗传算法的柔性生产线平衡优化技术研究[J].组合机床与自动化加工技术,2025(10):189-194.
WEI Jin, YAN Xianguo, CHEN Zhi, et al. Genetic algorithm-based optimization technique for flexible production line balancing[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):189-194.
基于深度强化学习的电极箔化成车间节能调度研究
王炳帆,袁逸萍,阿地兰木·斯塔洪,等.基于深度强化学习的电极箔化成车间节能调度研究[J].组合机床与自动化加工技术,2025(10):195-200.
WANG Bingfan, YUAN Yiping, ADILANMU Sitahong, et al. Research on energy saving scheduling for electrode foil plating workshop based on deep reinforcement learning[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(10):195-200.
【推荐阅读】
以上文章版权归组合机床与自动化加工技术杂志社所有，欢迎参考引用，请于文章参考文献中著录！
电 话：0411-86645290
E-mail：zhjcqk@126.com
网 址：http://zhjcz.com.cn/
